Showing posts with label Interference. Show all posts
Showing posts with label Interference. Show all posts

Saturday, 3 June 2017

Minutes - General Meeting 2017-04-04

Meeting held in the Sharon Temperance Hall. Called to Order at 19:30 by Chris VE3NRT. Total members attending: 32
  1. Welcome & Introductions – Chris VE3NRT
  2. Adoption of the Minutes from the 2017/03/07 general meeting postponed until May.
  3. Harvey Bell Award: Nominations for the Harvey Bell award should be forwarded to the board and/or the secretary for consideration.
  4. Bylaws: Suggestions for changes or amendments to the bylaws should be forwarded to the board and/or the president for consideration.
  5. 3D Printing: The Barrie ARC has been making useful amateur related items such as PowerPole breakouts and Pi cases using a 3D printer. Mike VE3MKX had some of the items for sale and display. See also http://barrie-wax-group.dyndns.org/
  6. Field Day and Repeater Report – Steve VE3UT:
    • Summer Field Day will be at the same location as last year – Al's Ride on Vandorf Rd. Steve will visit the site in the next few weeks to plan a new layout, since the property has been subdivided and we will need to fit our stations within the new boundaries.
    • Food Costs are increasing, with a possible increase in the price of 'food tickets'.
  7. There has been recent malicious interference on our repeaters, resulting in a letter being sent to IC, making a formal complaint about the offender. Since IC may now be monitoring our repeaters, each user is reminded to properly identify and use proper operating procedures. If necessary, we may possibly be required to shut down links between repeaters, or shut down repeaters.
  8. Field Day Food – Peter VE3PBT: Food costs were $814 in 2014, $844 in 2015 and $864 in 2016. For 2017 the expected cost will be $976 (almost $1000). In order to purchase the proper amount of food, we need a commitment of the numbers attending SFD and wanting to be fed by the AGM in June. Doug VE3VS asked 'how many would be attending' and the answer was approximately 50 based on past attendance. Doug proposed charging $15 per person this year (50 x$15 = $750) to better cover the food costs. A show of hands supported his proposal.
    Peter's daughter Sherri, is currently in hospital, recovering from surgery. In past years she has helped Peter in the Field Day Kitchen, but will likely not be able to participate this year. As a result, this year Peter will need extra help in the kitchen from club members.
  9. Treasurer’s Report – John VA3JI
    • Opening Balance 2017/03/01 [Balance available to members on request to Secretary]
    • Income: Membership dues $75.00
    • Expenditures: New projector $536.73
    • Closing Balance 2017/04/04 [Balance available to members on request to Secretary]
    • Moved the treasurer's report be adopted, by John VA3JI, seconded Brian VE3IBW. Carried
  10. Auditor: We need a new auditor, since our present auditor is not able to continue in the position. The auditor can not be currently on the board, but professional accreditation is not required. Doug Smith VE3XV, a new member, volunteered for the position.
  11. Public Service – Eric VE3EB. There are currently 9 public service events posted on the Yahoo group. Other events need to be confirmed.
  12. EmComm – Robert VA3BXG. The last 2 EmComm meetings have been cancelled due to low participation. The next meeting will be cancelled, due to the Easter weekend. There will be a SET (simulated emergency test) on Saturday May 27 for the Golden Horseshoe area, including the Western New York and Barrie areas. Instead of activating areas like EOCs, the focus will be on setting up temporary stations (probably outside) at arenas, community centres or similar locations in your own neighbourhood, where emergency shelters could possibly be located. Communication will be made using 2m equipment (subject to change). The SET would run from 08:00 to 13:00.

Break 20:10 – 20:25

Guest Speaker Bob VE3WY – “Antennae for Limited Space”. A 1/4 wave 80m vertical antenna would be approximately 62ft high, and the ground radials would be approximately 60ft long (in all directions). Guying the tower at 60 degrees would require 70 ft of ground space. If the height of the antenna was reduced to 30ft and bottom loaded, the match would be bad. If centre loaded the match would improve, and with a top hat, the match would be better. All of the radiation patterns would be similar.

A 30ft tall, 100ft horizontal inverted “L” antenna would also have gain.

An 80m horizontal dipole would be approximately 128 ft long, with an impedance of approximately 72 Ohms (in free space). Height above ground affects impedance and the radiation pattern. At 15ft above ground the impedance would be only 7.4 Ohms and the pattern would be vertical. At 30ft above ground, the impedance would be 26.6 Ohms, at 60ft above ground, 75 Ohms and at 100' above ground, 95 Ohms. At greater heights, the pattern would become less vertical and more horizontal.

If the dipole was shortened to 60ft long with loading coils 15ft from centre, the impedance would be 44.4 Ohms (in free space). The result: it is possible to fit an antenna into limited space (including the attic of a townhouse, and watch the cable company go crazy looking for their faulty installations).

Meeting adjourned at 21:05.

Sunday, 12 October 2014

Notes from the Shack - October 2014

Computer Problems and RFI

RFI is one of life's deep mysteries. As my station evolves it comes and goes in strange ways. I used to blow my garage GFCI any time I ran high power on 80m. That no longer happens. The Carbon monoxide detector starts beeping on 40m - the power required depends on the mode with CW being the most sensitive. 10 metres makes my subwoofer growl.

More recently, a new problem cropped up. I noticed during the CW WW RTTY DX contest that on 15m my USB Keyboard or USB mouse would go off line when running full power. To reset then, I could just unplug for a second or two and then plug it back it. 2 seconds is a long time during a RTTY contest but fortunately both weren't disconnected at the same time, so I could respond to a call with either.

The next day, while transmitting on 17m, the computer downstairs started throwing errors while I was copying some large files. A longer second transmission threw the disk drive off line completely and I had to restart the computer to get it working again. The next day I powered up my desktop system and got the blue screen of death. Hours of testing revealed that my SSD had failed completely. It's under warranty so the manufacturer will send me a blank one in return for the defective one. Whether RFI contributed to the demise of the SSD I'll never know - but so much for SSD reliability - I've gone back to hard drives, and added mirroring because I don't want to have that happen again.

Finally, a couple of days ago, while reinstalling software on the computer, I noticed a loose connection on my power supply. It turned out the U-shaped lug on the negative side of the supply to the transceiver was completed detached from the supply. Now one might think that this would have rendered the transceiver inoperable. However it seemed to be working perfectly normally! It is likely that the return path was made either through station grounding or the much thinner gauge power circuit to the antenna tuner.

Once the connection was fixed, I could transmit full power on 15 metres without upsetting the station computer at all. Good thing, because my opportunity test it was trying to reach W1AW/KH0 in the Mariana Islands on RTTY. I could barely copy him and needed all the power I had to get through.

One must learn from one's mistakes - and so I should be glad that I have so many opportunities to become more knowledgeable.

73,
Chris