Friday, 15 April 2016

Landfall in Europe

The balloon has crossed Portugal and Spain and is heading for the Bordeaux region of France (a personal favourite of mine!). It is only 80 metres lower than it was a couple of days ago, having climbed somewhat since yesterday. I surmise this is because we've moved into an area with higher barometric pressure. If the on-board altimeter were a barometric type, that wouldn't matter, but using GPS to measure altitude means that the actual altitude will be reported, which will be at the atmospheric density where the balloon's buoyancy and weight are at equilibrium.

Now we can see how many countries the balloon can visit during its lifetime. As far as I can tell, this is a record duration flight of all of them so far.


Thursday, 14 April 2016

Europe Bound?

VE3KCL's S-9 Balloon Experiment has certainly been making the rounds of the North Atlantic, first doing a loop around Greenland, then another around Iceland before almost returning to the point where it passed by Newfoundland in the first 24 hours of its journey, although it is now travelling in the opposite direction.

You can see in the map below the most likely nighttime path has been added to the map in blue, while the daytime path, reported by the on board GPS, is shown in red. The night time paths are calculated from NOAA wind predictions, as explained on the web page.


Last night's path hasn't been added yet but it is fairly easy to imagine. The last report yesterday was somewhat Southeast of Iceland and during the night it traveled Southwest where at daybreak it started reporting again off the coast of Newfoundland. Perhaps now it will find fair winds to Europe. It is still maintaining altitude at 9990 metres, or 32,776' so it seems to be holding together well.

This morning (as of 0900 EDT, 1300Z) most of the reports are from North American stations including two from Ontario in FN25. Its most recent report was picked up by only two stations, VE1VDM (near Truro, NS) and W3BH (Pennsylvania).


Tuesday, 12 April 2016

Fickle Winds

Dave, VE3KCL, has launched yet another balloon experiment. This one, now in its third day, is taking a different path to any of those we've seen before.


Right now it's being heard in Sweden. You can look for it on the wsprnet web page and try to hear it on WSPR and/or JT9 on 30m.

Wednesday, 30 March 2016

Can this Really be the End?

It certainly looks that way for the most recent VE3KCL balloon experiment. The last report was at 1930Z today - long before dark when the battery runs down and it stops reporting. Also telling is the altitude at which the last report was observed - a mere 410 metres.


So after 10 hours it seems to have landed in the middle of Martha's Vineyard. I wonder if someone will find it? When zoomed in you can see its last report in Manuel F. Correllus State Forest but it may well have crossed or even landed in Martha's Vineyard Airport at it was still at 410m at its last report. The shorter of the two runways it was closest to at the time is only 3,328' long so the balloon would have only been 500' from the airport grounds where the track ends. So while its descent was probably mostly vertical it may well have continued to travel Eastward a little bit.


Nothing about it in the Martha's Vineyard news that I could find, though.

VE3KCL Balloon - part 2

I tracked the balloon until faded out. Here are the data recorded by WSJT-X in the JT9 mode.

Time dB DT Freq Call Grid Text
1137 -11 -0.8 2476 VE3KCL FN03NU
1144 -7 -1 2476 4353.0502157
1145 -11 -0.8 2476 07843.122815
1149 -9 -1 2475 VE3KCL FN03PV
1156 -9 -1 2473 4353.8461145
1157 -12 -1.2 2473 07831.133829
1201 -12 -0.7 2472 VE3KCL FN03RV
1208 -10 -1 2468 4353.6379135
1209 -10 -1 2468 07818.756850
1213 -15 -1.1 2473 VE3KCL RN03UV
1220 -14 -1 2471 4351.1441127
1221 -16 -1.1 2470 07804.920867
1225 -14 -1 2468 VE3KCL FN03XU
1232 -15 1 2454 4346.8269104
1233 -15 -0.8 2451 07751.767890
1237 -12 -1 2460 VE3KCL FN13BS
1244 -16 -1 2445 4340.67300084
1245 -16 -1 2440 07737.519883
1249 -18 -1 2461 VE3KCL FN13EP
1256 -21 -0.9 2441 4331.4491066
1257 -19 -1 2437 07721.483A23
1301 -22 -1.1 2455 VE3KCL FN13HL
1308 -23 -1 2452 4320.7750057
1309 -22 -1 2454 07707.400A23
1313 -24 -1 2482 VE3KCL FN13KH
1320 -25 -1 2542 4315.6263087
1321 -25 -0.9 2549 07653.209A15
1325 -25 -0.8 2503 VE3KCL FN13NF
1332 -26 -1 2523 4312.4709146
1333 -26 -0.8 2524 07639.208920
1337 -26 -0.9 2473 VE3KCL FN13QE
1344 -26 -0.9 2477 4310.1699168
1345 -26 -1 2478 07624.540907
1349 -27 -1 2474 VE3KCL FN13TD
1356 -28 -0.9 2476 4307.6818172
1357 -27 -1 2476 07610.158923

The last position report at 1349Z was from just Northwest of Syracuse, New York. I switched over to WSPR about 30 minutes later but didn't receive any reports even though there were signals decoded from over 1800 kilometres away. There are plenty of other WSPR receiving stations that will now be tracking the balloon so a later report will hopefully be able to show the position of the balloon as it makes it way toward the Atlantic.


Breaking News - VE3KCL - another balloon flight

Several flights have been reported here before. There was another that got as far as the mid-Atlantic a few weeks ago published on the QRP Labs web site. The site does not mention a flight happening right now, but I was monitoring JT9 on 30m a few minutes ago and received some transmissions which look suspiciously like a balloon flight,. Here's what I saw.

  • [1137] -11 VE3KCL FN03NU
  • [1144] -7   4353.0502157
  • [1145] -11 07843.122815
  • [1149] -9   VE3KCL FN03PV
  • [1156] -9   4353.8461145
  • [1157] -12 07831,133829
  • [1201] -12 VE3KCL FN03RV
  • [1208] -10 4353.6379135
  • [1209] -10 07818.756850
  • [1213] -15 VE3KCL FN03UV
There may have been other transmissions between 1137 and 1144 as I was transmitting in two of those 1-minute slots, although based on the pattern I think that unlikely. The above lists the time in UTC, the signal strength in dB and the content of the transmission. The frequency is 10.140468 MHz. The DT (delta time, which is the difference between the balloon's clock and mine) is not shown but has varied between -0.8 and -1.2 so far.

FN03NU is centred over Lakefront Park in Oshawa, while 12 minutes later it was ENE of the former position in the Bowmanville area. The transmission at 1201 show it in FN03RV which is still on the lake shore East of Wilmot Creek over Lovekin (an easy grid square locator with map is on the http://www.qrz.com/gridmapper). So it appears to have been released not that long ago. The last reading shown above is over Lake Ontario directly South of Port Hope. Click the map for a larger view.



I don't know what the telemetry means and was unable to find it on the web site. It appears to have changed from the previous flight. 

That's all for now. I'll see how long I can track it today and report back here.

Saturday, 26 March 2016

Notes from the Shack - March 2016

It's been a while since I wrote one of these (and I'm sure I've written those same words before). However, it is time to improve the antenna situation at the VE3NRT QTH which will prompt many investigations and conversations about all things antenna. Brad VE3HII stated once that the budget for antennas should be at least 3 times that of the transceiver, and now that I've started budgeting it may turn out to be an understatement.

Up to now there are 4 antennas in rotation at the QTH:
  1. A Butternut HF6V. This is been my mainstay antenna for over 30 years (including 20 years where it sat on the ground beside the driveway at the old QTH in London while I was getting established in the Greater Toronto Area. It is now quite unreliable despite several attempts to refurbish it.
  2. A G5RV at about 35'. Well the middle is about 35'. One end is almost as high. With the recent ice storm, the other end is at about 20'. It still works pretty well and has yielded me quite a number of new DX contacts. The biggest problem with the G5RV is the 150' of not very good coax that feeds it. On 6 metres it's absorbing at least 40% of my output power.
  3. A 40m dipole. I used this at home on 40 and 15 (and sometimes 6) before I had the G5RV. I originally built it on vacation in Florida to run as an inverted V. Consequently it is a bit short to use as a dipole, as inch for inch, an inverted V tunes lower.
  4. A home-made 6m loop. This antenna worked well (Venezuela was my best contact on it) even though it was hung in a tree at less than 20'. It had a tendency to fall out of the tree in a strong wind.
Usually at least one antenna was working at any given moment. But it's time to do something better. The first step in my study has been to look at transmission lines, and the book "Low Band DXing" by ON4UN has been one of the main references. In the chapter on transmission lines, it mentions calculating the loss in coax by measuring the SWR. Now with new coax, you can just look up the loss. Each brand usually has a chart, table, and/or formula for calculating the loss at various frequencies.

However, it might be the case that you have existing coax (whether it be in storage or actual operation) that you want to test. I happened to have a nice 50' piece of RG-213 lying around that I could experiment with, and ON4UN's book had a formula for loss based on measuring VWSR with one end of the cable unterminated. The idea is that you measure VWSR (with an SWR meter or an analyzer - I used the latter) and use the formula to derive the loss.

The formula given in the book is:
$$Loss(dB) = log_{10}\bigg[{SWR+1 \over SWR-1}\bigg]$$
Armed with this formula I measured the cable from 50 to 600 MHz. There were peaks and valleys in the reading (the book never mentioned those) so I used the peaks and came up with an answer of about .4 dB at 570MHz. I realized there must be a mistake as my piece of RG213 had not taken on magical low-loss properties.

In addition, most formulas involving decibels (except ones with ratios of decibels) have the number 10 in them someone, and my result seemed about 1/10th of what it should have been.
Sure enough, on checking some other references I found that the formula should have been expressed as:
$$Loss(dB) = 10 \times log_{10}\bigg[{SWR+1 \over SWR-1}\bigg]$$
Increasing the resolution of the analyzer and reducing the sweep to 550MHz±50MHz showed an undulating pattern of VSWR rising and falling across the range of frequencies. The gap between peaks was about 6.2MHz. An Anritsu web page recommended averaging the SWR in the peaks and valleys. Here's what a 10Mhz segment looks like on the analyzer.


Frequency is on the x-axis and VSWR on the y-axis.

In the 550±50Mhz range the maximum VSWR was 3.525 and the minimum 1.762, yielding an average VSWR of 2.643 and a calculated loss of 3.459 dB. The chart says reads about 6.8 dB so this tells me that the measurements and calculations are likely correct and that the cable is in good condition. A 2005 QEX article by AI1H recommends combining this measurement with the same method applied to a shorted, rather than unterminated, coax. I haven't tried this yet.

The label says that it is JSC Wire & Cable RG213/U part #3780 with a velocity factor of .66. Loss at 400MHz is supposed to be only 4.8dB per 100' at 400Mhz and 8.2dB per 100' at 900 MHz so either the manufacturer is a bit optimistic (say it ain't so), the cable is longer than I think it is, or something else is wrong. So it appears the numbers work well but I want to try a few more examples before declaring that I really understand it.

The above equation means that as the cable loss goes up, the VSWR at the radio end goes down. So cheap cable, especially a long run of cheap cable, will make your VSWR look good but not achieve any real value in terms of communications. Quite the opposite in fact.

A final thought is that the equation for "Return Loss", which is a term I'm starting to notice quite often, is:
$$Return loss(dB) = 20 \times log_{10}\bigg[{SWR+1 \over SWR-1}\bigg]$$
This is just double the value of the cable loss, and represents the "there and back" loss, not just the one-way loss from antenna to transceiver, or vice-versa.

Next steps: measure the cable physically and electrically.